TANK AMMUNITION

\ 120 MM G151 TPCSDS-T

The G151 training round is designed to resemble the Armor-Piercing model, Fin-Stabilized, Discarding-Sabot Tracer (APFSDS-T) in operational performance. It utilizes a unique cone stabilizer to limit the safety fan required for tank gunnery. With its matched exterior ballistics, the G151 provides a realistic training device displaying the accuracy and time-of-flight of the service round. The cone stabilizer provides a safety feature limiting the overall flight range to under 8 km, reducing the requirement for extreme range safety fans.

\ 120 MM TP-T G211

This cartridge is kinetic energy, target practice round designed to be fired from a standard NATO 120mm gun with a smooth-bore barrel. It is designed to simulate the service round characteristics at reduced maximum ranges to allow practice firings on short-range proving grounds and training areas. The cartridge is approved for firing in L44 and L55 barrels. The cartridge, 120mm, TPCSDS-T, G211 contains a propulsion system consisting of a stub metal case with combustible sidewall, granular propellant, and electric primer, while the projectile consists of sub-projectile and aluminium sabot.

\ 120 MM HEAT-MP-T

This cartridge is a high explosive multipurpose cartridge which has antiarmor and antipersonnel capabilities. The cartridge is intended for use in NATO 120mm (L44 or L55) smooth-bore gun system or equivalent. The round consists of a steel body loaded with explosives surrounding a copper shaped charge liner and waveshaper. The projectile embodies a steel spike with a shoulder and nose switching mechanism for full-frontal area functioning and graze impact which initiates a base detonating fuze. The fuze is located at the rear of the projectile body. The projectile body has a copper obturator, boom and fin assembly for flight stabilization. The fin contains a tracer for the projectile to target visual tracking.

\ 105 MM HEAT-T M456A1

It has a dual role capability in killing dismounted infantry by blast and fragmentation and in destroying lightly armoured and non-armoured vehicles and bunkers. The steel body projectile is fitted with a plastic obturator, a threaded standoff spike assembly, a fin and boom, and a PIBD fuze. A funnel-shaped copper liner within the body shapes the explosive charge of Comp B. A piezoelectric element retained in a nose cap is fitted to the spike assembly and is connected to the BD fuze in the body. The fin is threaded to receive a tracer. The cartridge is designed for use with M68, L7, F1 or equivalent guns (NATO STANAG 4458).

\ 105 MM HE R-105-60

The 105 mm HE is a fixed round, with the projectile rigidly secured to the brass cartridge case by a single crimping ring. This engages in a pronounced cannelure on the projectile just to the rear of the copper or gilding-metal drive band. Use with PD initiation fuzes. The practice round known as 105 mm TP INERT is produced as the training equivalent for the 105 mm HE R-105-60. The cartridge is designed for use with M68, L7, F1 or equivalent guns (NATO STANAG 4458).

\ 105 MM HEAT–T MZ

The 105 mm HEAT-T MZ is a fixed round, with the finned projectile assembly securely crimped to a steel M148A1 pattern cartridge case. As it has the same dimensions and weights as the projectiles of the M456A1 family, it shares the same internal and external ballistics with them, significantly improving penetration performance on NATO multiple targets. The projectile assembly consists of a blunt-nosed shaped warhead, with a prominent standoff spike containing the point-impact fuze system. A light metal boom protrudes from the rear of the warhead assembly and carries six stabilising fins. The steel M148A1-pattern cartridge case has an M83 electrical primer fitted to the base.

\ 105 MM APFSDS-T C512

The C-512 consists of a tungsten alloy core helb by a 3-piece aluminium sabot. It uses the M148F cartridge case, which is filled with 5,7 kg of B19T single-base 19-perforation cylindrical pellets. These yield a chamber pressure of no more than 345 MPa and peroration of the NATO triple target at 4,550 meters, and a 120 mm target at 70 at 3,500 meters.

\ 105 MM TP-T M490

The 105mm M490 TP-T cartridge is for use in 105mm gun cannons for training in marksmanship. Internal and external ballistic equal to M456A1 cartridge. The projectile consists of a steel body, a standoff spike, and a boom and fin assembly with a tracer. The cartridge case is filled with loosely packed propellant and is fitted with an electronic primer. The cartridge is designed for use with M68, L7, F1 or equivalent guns (NATO STANAG 4458).

\ 105 MM TPCSDS-T G141

The 105 mm TPCSDS-T G141 is a training cartridge with a unique cone stabilizer concept that reduces the safety zone required for tank gunnery practice in short-range training areas, with a safety range of 7.5 km. The TPCSDST range is up to 8 km. The cartridge is designed for use with M68, L7, F1 or equivalent guns (NATO STANAG 4458).